Fujitsu MHW2040BS Product Manual page 187

*16 WORD 82
Bit 15:
Bit 14:
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 9:
Bit 8:
Bit 7:
Bit 6:
Bit 5:
Bit 4:
Bit 3:
Bit 2:
Bit 1:
Bit 0:
*17 WORD 83
Bit 15:
Bit 14:
Bit 13:
Bit 12:
Bit 11:
Bit 10:
Bit 9:
Bit 8:
Bit 7:
Bit 6:
Bit 5:
Bit 4:
C141-E249
Undefined
'1' = Supports the NOP command.
'1' = Supports the READ BUFFER command.
'1' = Supports the WRITE BUFFER command.
Undefined
'1' = Supports the Host Protected Area feature set.
'1' = Supports the DEVICE RESET command.
'1' = Supports the SERVICE interrupt.
'1' = Supports the release interrupt.
'1' = Supports the read cache function.
'1' = Supports the write cache function.
'1' = Supports the PACKET command feature set.
'1' = Supports the power management feature set.
'1' = Supports the Removable Media feature set.
'1' = Supports the Security Mode feature set.
'1' = Supports the SMART feature set.
= 0
= 1
'1' = Supports the FLUSH CACHE EXT command.
'1' = Supports the FLUSH CACHE command.
'1' = Supports the Device Configuration Overlay feature set.
'1' = 48 bit LBA feature set.
'1' = Automatic Acoustic Management feature set.
'1' = Supports the SET MAX Security extending command.
Reserved
'1' = When the power is turned on, spin is started by the SET
FEATURES sub-command.
'1' = Supports the Power-Up In Standby set.
'1' = Supports the Removable Media Status Notification feature
set.
5.3 Host Commands
5-113