Sharp AR M550N - B/W Laser - Copier Installation Manual page 11

5) Select the type of paper that was loaded in the tray.
Example: The paper type of tray 3 is selected.
CUSTOM SETTINGS
TRAY 3 TYPE/SIZE SETTING
SELECT THE PAPER TYPE.
PLAIN LETTER HEAD
PRE-PRINTED PRE-PUNCHED
RECYCLED COLOR
Touch the desired paper type to select it. The paper size setting
screen will appear.
Notes:
• Tabbed paper can only be used in tray 3 and the bypass tray.
• Label sheet, OHP: Tray 1, 2, 4, and 5 cannot be used.
• Heavy paper: Tray 1, 2, and 5 cannot be used.
6) Select the size of paper that was loaded in the tray.
Touch the appropriate keys (checkboxes).
CUSTOM SETTINGS
TRAY3 TYPE/SIZE SETTING
TYPE
PLAIN AUTO-INCH
AUTO-AB
SIZE INPUT
[AUTO-INCH] key: Select when you have loaded an inch-based
size of paper.
[AUTO-AB] key: Select when you have loaded an AB size of
paper.
[SIZE INPUT] key: Select to directly enter a paper size.
[NON STANDARD Select when you have loaded a non-standard
SIZE] checkbox: size of paper.
Note: Sizes that can be selected vary depending on the selected
paper type.
7) Touch the [OK] key in the size setting screen.
You will return to the tray setting screen of step 3.
8) Select output functions that can be used with the selected tray.
Touch the checkboxes under the desired items to select them.
PRINT COPY
Note: When the inserter (option) is selected, printing of faxes and
Internet faxes is not possible.
User type
Select a "User type" when the name of the paper type does not appear
in the selections or when you wish to select the tray attributes yourself.
Touch the key in step 5 on the previous page to display the user
type selection screen and then select a user type.
CUSTOM SETTINGS
TRAY 3 TYPE/SIZE SETTING
SELECT THE PAPER TYPE
USER TYPE 1 USER TYPE 2
USER TYPE 5 USER TYPE 6
CANCEL
1/2
HEAVY PAPER TAB PAPER
LABELS
TRANSPARENCY
1/2
OK
TYPE
SIZE
11X17,8 X14,8 X11 1 / 1 /
2 2
8 X11R,7 X10 ,5 X8 R
1 / 1 / 1 / 1 / 1 /
2 4 2 2 2
A3,A4,A4R,A5R,B4,B5
B5R,216X330(8 X13) 1 /
2
NON STANDARD
X Y
SIZE
2/2
DOC.
I-FAX
FAX
FILING
CANCEL
2/2
USER TYPE 3 USER TYPE 4
USER TYPE 7
1/2
AR-M550/M620/M700 INSTALLATION MANUAL (AR-M550/M620/M700) 1 - 10
9) Set the attributes of the paper tray only if you have selected a user
type. (Touch the checkboxes to the left of the items to select them.)
DOC.
FILING
"FIXED Select when paper is to be loaded print side down
PAPER SIDE": in the tray.
Make sure a checkmark does not appear when
paper is to be loaded print side up.
• If the two-sided function is prohibited in
"DISABLING OF DUPLEX" in the key operator
programs, do not use this setting.
"DISABLE Prohibits two-sided printing.
DUPLEX": Enable when the back side of the paper cannot be
printed on.
"DISABLE Prohibits stapling. Enable when using special
STAPLE": papers such as transparency film and label sheets.
"DISABLE Prohibits punching. Enable when using special
PUNCH": papers such as transparency film and label sheets.
Notes:
• Paper tray attributes cannot be set when a user type is not selected.
• Tray attributes depend on the selected paper.
• "FIXED PAPER SIDE" and "DISABLE DUPLEX" cannot be simulta-
neously enabled.
10) Configure paper settings for each tray and then touch the [OK] key
to exit.
Note: The size and type of paper loaded in the bypass tray can also
be set from the paper setting screen. Touch the [PAPER
SELECT] key in the main screen to display the paper selection
screen, and then touch the [PAPER SELECT] key of the bypass
tray and go to step 5.
(8) Setting the paper size when a special size is loaded
Note: Special sizes of paper cannot be loaded in trays 1, 2, 4 and 5.
[Trays 3 and the bypass tray]
1) Perform steps 1 through 5 of "Setting the paper type and paper
size".
2) Touch the [SIZE INPUT] key and then touch the [INCH] tab.
(The size entry palette appears.)
Y
X 17
Y
11
AB
3) Touch the key or the
(length) dimensions of the paper.
X (width) is initially selected. To enter Y (length), touch the [Y] key
and then enter the length.
X
Y
17
X
Y 11
AB
FIXED PAPER SIDE
DISABLE DUPLEX
DISABLE STAPLE
DISABLE PUNCH
OK
(5 1/2 17)
inch
(5 1/2 11 5/8)
inch
INCH
key to enter the X (width) and Y
OK
(5 1/2 17)
inch
(5 1/2 11 5/8)
inch
INCH