Searching For A Destination - Konica Minolta bizhub C550 User Manual

Sending a user box document
4
Select the destination where the data is to be sent, and then touch
[OK].
– To select all destinations, touch [Select All].
– To deselect all destinations, touch [Reset].
– Additional destinations can be added by directly typing in the ad-
dress.
The button appears selected, and the destination appears under
"Broadcast Destinations".

Searching for a destination

A search for the desired destination can be performed using any of the fol-
lowing methods. The following procedure describes how to perform a
search.
Method
Index
Address Type
Search
Address search
C550
Description
This button appears if "Default Address Book" (displayed by touching
[Custom Display Settings] on the User Settings screen, then [Fax/Scan
Settings]) is set to "Address Type". The index characters can be
searched based on the character that was specified when the destina-
tion was registered.
This button appears if "Default Address Book" (displayed by touching
[Custom Display Settings] on the User Settings screen, then [Fax/Scan
Settings]) is set to "Index". The destination types can be searched
based on the type that was specified when the destination was regis-
tered.
Type in the destination name or part of the address to search for the
corresponding address.
An LDAP search can be performed if an LDAP server is being used, for
example, for user management. Search the addresses registered on
the LDAP server for the address that corresponds to the conditions. A
basic search, where a keyword is entered, and an advanced search,
where multiple conditions are used to narrow down the search, are
available.
5
5-11