Serial Port Configuration; Apm - Asus Z87-K User Manual

Z87-k user's manual
Hide thumbs Also See for Z87-K:
Table of Contents

Advertisement

Realtek PXE OPROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Realtek LAN controller.
Configuration options: [Enabled] [Disabled]

Serial Port Configuration

The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled]
[Disabled]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you
to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4]
[IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.8

APM

Deep S4 [Disabled]
Allows you to enable or disable entering deep S4 sleep mode. The system in deep S4 state
can be woken up via the power button, devices in LAN, or other ways except via the USB
and PS/2 devices. Configuration options: [Enabled] [Disabled]
Restore AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
[Power Key]
Power On By PS/2 Mouse [Disabled]
[Disabled]
[Enabled]
Power On By PCIE/PCI [Disabled]
[Disabled]
[Enabled]
2-32
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Disables the Power On by a PS/2 mouse.
Enables the Power On by a PS/2 mouse. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Disables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel
/Realtek LAN device.
®
Enables the PCIE/PCI devices to generate a wake-on-LAN feature of the
Intel
/Realtek LAN device.
®
Chapter 2: Getting started

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents