Serial Port Configuration - Asus Z97-E/USB3.1 User Manual

SPDIF Out Type [SPDIF]
[SPDIF]
[HDMI]
Depop [Enabled]
Configuration options: [Disabled] [Enabled]
Audio Shielding LED [Auto]
[Auto]
[Disabled]
ASM1142 Bandwidth [X2 mode]
[X2 mode]
[X1 mode]
Asmedia USB 3.1 controller [Enabled]
[Enabled]
[Disabled]
The following two items appear only when you set the Asmedia USB 3.1 controller item to
[Enabled].
USB 3.1_1 [Enabled]
[Enabled]
[Disabled]
USB 3.1_2 [Enabled]
[Enabled]
[Disabled]
Intel LAN Controller [Enabled]
[Enabled]
[Disabled]
Intel LAN PXE Option ROM [Disabled]
This item appears only when you set the previous item to [Enabled] and allows you to enable
or disable the PXE OptionRom of the Intel LAN controller. Configuration options: [Enabled]
[Disabled]

Serial Port Configuration

The sub‑items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled]
[Disabled]
2‑38
Sets to an SPDIF audio output.
Sets to an HDMI audio output.
The LED control depends on the configuration of the ErP Ready item. Set
this item to [Auto] and the ErP Ready item to [Disabled] to keep the LED
on.
Turn off the LED.
ASM1142 runs at X2 mode for high performance support. PCIe X1_2 will
be disabled.
ASM1142 runs at X1 mode with all slots enabled.
Enables the Asmedia USB 3.1 controller.
Disables the controller.
Enables the USB 3.1_1 port.
Disables the port.
Enables the USB 3.1_2 port.
Disables the port.
Enables the Intel LAN controller.
Disables the controller.
Chapter 2: Getting started