Asus Z87-A User Manual page 46

6. USB 2.0 connectors (10-1 pin USB910; USB1112; USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.� specification that supports up to
480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q�Connector (USB, blue) first, and
then install the Q-Connector (USB) to the USB connector onboard if your chassis supports
front panel USB ports.
•
•
1-36
The USB 2.0 module is purchased separately.
These connectors are based on x�CI specification. We recommend you to install the
related driver to fully use the USB 2.0 ports under Windows 7.
®
ASUS Z87-A