Advertisement
5.6.4
Setting parameters
1.
At factory shipment of the IDD, the saving operation for the MODE
SELECT parameter is not executed.
parameters, the IDD operates according to the default value of each
parameter
2.
The MODE SELECT parameter is not saved for each SCSI ID of but as
the common parameter for all IDs. In the multi-INIT System, parameter
setting cannot be changed for each INIT.
3.
Once parameters are saved, the saved value is effective as long as next
saving operation is executed from the INIT. For example, even if the
initialization of the disk is performed by the FORMAT UNIT command,
the saved value of parameters described in this section is not affected.
4.
When the IDD, to which the saving operation has been executed on a
system, is connected to another system, the user must pay attention to
that the IDD operates according to the saved parameter value if the
saving operation is not executed at installation.
IMPORTANT
So, if the user does not set
Advertisement
