Upgrading The Firmware Of Lan Docking Stations - Philips LFH9160 - LFH 9160 - Digital Voice Recorder Docking Station User Manual

• A flag indicates if the file upload settings of
the LAN Docking Station are taken from
the Digital Pocket Memo or from the LAN
Docking Station itself in the USE DPM
UPLOAD SETTINGS column.
• A flag indicates if all files (or EOL dictation
files only) get uploaded to the FTP/SFTP
server by the LAN Docking Station in the
UPLOAD ALL column. For this setting to take
effect, the LAN Docking Station has to be in
charge of the file upload settings!
• A flag indicates wheter the dictation files will
be deleted from the Digital Pocket Memo
after they were uploaded to the FTP/SFTP
server by the LAN Docking Station in the
DELETE UPLOADED column. For this setting to
take effect, the LAN Docking Station has to
be in charge of the file upload settings!
• Some commentary data, including a room
description and a general comment on the
LAN Docking Station in the ROOM and
COMMENT column.
Enter your changes directly in the fields of
1
the Administration Tool's main pane.
Click the
2
SUBMIT CHANGES
the bottom right corner of the form. An
overview of the settings is displayed. These
settings will be sent to the LAN Docking
Stations after confirmation by clicking the
button. The result of the operation of
OK
each LAN Docking Station is shown in a
result window. Clicking the
will close the overview, but will keep the
new settings stored for later submission.
Upon clicking the
User manual
button in
button
CANCEL
button,
UNDO CHANGES
any stored settings will be deleted.
D Note
Settings can only be uploaded to LAN Docking
Stations that are currently online.
Important
C
Changes made to a single LAN Docking Station
have precedence over any settings made in the
global settings form that apply to the same LAN
Docking Station!
5.9 Upgrading the firmware of LAN
Docking Stations
Download the latest firmware (.bce file)
1
from www.philips.com/dictation
Save the .bcd file to to a network location
2
that the LAN Docking Station can access.
This can be an FTP server or an HTTP Web
server.
Click on the
3
FIRMWARE UPGRADE
the symbol bar of the Administration Tool
Select the type of server (FTP, SFTP, HTTP)
4
where the .bcd file is saved.
Enter the domain name or IP address of the
5
server hosting the firmware file into the
field.
SERVER
Enter the port number of your server
6
into the field. Unless your server
PORT
is configured to use non-standard port
numbers, you should use 21 for an FTP
server, 22 for an SFTP connection and 80 for
an HTTP Web server.
If your server requires authentication to
7
button on
23