Rs-232C Command Table; Power Control/Input Mode Selection - Asus PQ321Q User Manual

Controlling the Monitor with a PC (RS-232C)

RS-232C command table

How to read the command table
Command: Command field (See page 24.)
Direction: W When the "Parameter" is set in the parameter field (See page 24.), the command functions as described under
R The returned value indicated under "Reply" can be obtained by setting "????", "
Parameter: Parameter field (See page 24.)
Reply: Response (Returned value)
*: " " indicates a command which can be used in power standby mode regardless of the STANDBY MODE setting.
" " indicates a command which cannot be used in power standby mode when STANDBY MODE is set to LOW POWER.
"–" indicates a command which cannot be used in power standby mode regardless of the STANDBY MODE setting.

Power control/Input mode selection

Function
POWER CONTROL
INPUT MODE SELECTION
2
E
"Control/Response Contents".
(See page 24.)
Command Direction Parameter
POWR W
R
INPS W
R
Reply
0 Switches to standby mode.
1 Returns from standby mode.
0 Standby mode
1 Normal mode
2 Input signal waiting mode
0 Toggle change for input mode. Terminals not selected in INPUT SELECT cannot be
selected.
9 HDMI1 [AV]
"ERR" when PC is selected for HDMI1 of INPUT SELECT.
10 HDMI1 [PC]
"ERR" when AV is selected for HDMI1 of INPUT SELECT.
12 HDMI2 [AV]
"ERR" when PC is selected for HDMI2 of INPUT SELECT.
13 HDMI2 [PC]
"ERR" when AV is selected for HDMI2 of INPUT SELECT.
14 DisplayPort
15 HDMI DUAL
9 HDMI1 [AV]
10 HDMI1 [PC]
12 HDMI2 [AV]
13 HDMI2 [PC]
14 DisplayPort
15 HDMI DUAL
?" in the parameter field.
Control/Response contents *
•
•
•