Set The Sleep Timer; Adjust Display Brightness - Philips DC291/37 User Manual

Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated, [
[ AL2] is displayed.
» If the timer is deactivated, [
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Tip
•
You can press / to adjust the interval to
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm settings
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.

Set the sleep timer

This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated, the
display shows
gradually decrease in the last 5 minutes.
18 EN
AL 1] or
AL1] or
, and the volume will
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
» When the sleep timer is deactivated,
disappears on the display.

Adjust display brightness

1
Press BRIGHTNESS/REP ALM repeatedly
to select different levels of display
brightness.