Samsung WB200F User Manual page 67

Shooting in the dark
Icon Description
Slow Sync:
• The flash fires and the shutter stays open longer.
• This option is recommended when you want to capture more
ambient light to reveal more details in the background.
• Use a tripod to prevent your photos from blurring.
• The camera will display the shake warning
shooting in low light.
Red-eye Fix:
• The flash fires twice when the subject or background is dark. The
camera corrects red-eyes through its advanced software analysis.
• There is an interval between the 2 bursts of the flash. Do not move
until the flash fires a second time.
Available options may differ depending on the shooting conditions.
• Flash options are not available if you set Burst options or select Blink
Detection, Self-Portrait.
• Make sure that your subjects are within the recommended distance from the
flash. (p. 151)
• If light from the flash is reflected or there is a substantial amount of dust in the
air, tiny spots may appear in your photo.
• In some modes, you can also set the flash option by pressing [
then selecting Flash.
Adjusting the flash intensity
Adjust the flash intensity to avoid over-exposed or under-exposed photos.
1
In Shooting mode, press [ ].
2
Scroll to an option.
3
Press [
when you are
4
Press [ / ] to adjust the intensity.
• You can also drag the slider or touch +/- to adjust the intensity.
5
Press [
], and
66
Shooting options
].
Auto : 0
Back Set
] to save your settings.
• Adjusting the flash intensity may not be effective if:
- the subject is too close to the camera
- you set a high ISO sensitivity
- the exposure value is too big or too small
• In some shooting modes, you cannot use this function.