Using the Magic Plus mode
Using the Split Shot mode
In Split Shot mode, you can capture several photos and arrange them with
preset layouts.
1
Rotate the mode dial to
2
Select
.
• To select another mode when the mode dial is set to
, and then select a mode.
3
Select a split style.
• To adjust the sharpness of the dividing line, press [
select Line Blur → a value.
• To apply a Smart Filter effect to part of the shot, press [
select Smart Filter → an option. You can apply different Smart Filter effects
to each part of the shot.
• To adjust the size of the frame, drag the dividing line. Touch
style again to discard your changes.
OK : Panel off
.
, press [
], and then
], and then
or the split
4
Align your subject in the frame, and then half-press [Shutter] to
focus.
5
Press [Shutter] to capture a photo.
• Repeat steps 4 and 5 to capture the rest of the photos.
• To recapture a photo, press [
] or touch
• The resolution is set to
• The available zoom range may be less than in other shooting modes.
55
Extended functions
].
or smaller.