Table of Contents
Advertisement
Installation Manual
RANGE HOOD
MODEL: BUF-03R
Safety Instructions .................................................................................................. 2
Name of Parts ......................................................................................................... 4
Size & Dimensions .................................................................................................. 4
Range Hood Location ............................................................................................. 5
Installation ............................................................................................................... 6
1. Preparation ..................................................................................................... 6
2. Range Hood Mounting .................................................................................... 9
3. Connecting Power Supply Wires ................................................................... 11
4. Final Assembly and Check ............................................................................ 13
5. Explanation to the End User ......................................................................... 14
Circuit Diagram ..................................................................................................... 14
READ AND SAVE THESE INSTRUCTIONS.
Keep this manual in a convenient place for future reference.
TABLE OF CONTENTS
FUJI INDUSTRIAL CO., LTD.
1U030981
Advertisement
Table of Contents
Related Manuals for Fujioh BUF-03R
Summary of Contents for Fujioh BUF-03R
-
Page 1: Table Of Contents
Installation Manual RANGE HOOD MODEL: BUF-03R Safety Instructions ... 2 Name of Parts ... 4 Size & Dimensions ... 4 Range Hood Location ... 5 Installation ... 6 1. Preparation ... 6 2. Range Hood Mounting ... 9 3. Connecting Power Supply Wires ... 11 4. -
Page 2: Safety Instructions
Before installation and operation, read these instructions carefully and use this product only in the manner described by the manufacturer in the operation manual. The instruction shown below are used to alert you to potential personal injury and property damage hazards. - Page 3 1. For general ventilating use only. Do not use to exhaust hazardous or explosive material and vapors. 2. To reduce the risk of fire and to properly exhaust air, be sure to duct air outside. Do not vent exhaust air into spaces within walls, ceilings or into attics, crawl spaces or garages. 3.
-
Page 4: Name Of Parts
- Accessories - - Accessories - - Accessories - - Accessories - - Accessories - SIZE & DIMENSIONS (Unit : inch) NAME OF PARTS Screw M5×30 Four (4) pieces Nut with plate Four (4) pieces... -
Page 5: Range Hood Location
The range hood must be installed just above the cooktop. The minimum distance from the cooking surface to the bottom of the range hood must be 24". The total weight of the BUF-03R range hood unit is: BUF-03R -------- 18 lbs. (8 kg) Power requirements are: AC120 V, 60 Hz, 1.8 Amp... -
Page 6: Installation
1. PREPARATION WARNING • If the range hood is not installed properly, it could become detached and fall off. • Ensure that the metal duct does not touch other metal housing materials, otherwise fire or electric shock could result. This range hood can discharge upward or backward. - Page 7 INSTALLATION (continued) Run house wiring between service panel and hood location. Prepare the range hood unit. In case of Vertical Discharge (1) The range hood is supplied with the exhaust pipe fixed on its top plate. (2) Provide a transition duct (not supplied) to connect the exhaust pipe and external duct.
- Page 8 INSTALLATION (continued) In case of Horizontal Discharge (1) Referring to Fig. at right, provide a rectangular hole in the wall for passing through the exhaust pipe. (2) Remove the exhaust pipe from the top of the range hood. NOTE Keep 4 screws (M4 exhaust pipe later.
-
Page 9: Range Hood Mounting
INSTALLATION (continued) 2. RANGE HOOD MOUNTING Hold up the range hood unit and insert it into the opening of the liner. When the 4 securing plates on both sides have passed through the top of the liner, turn them outward to secure the range hood on the liner temporarily. Make sure that the top of the exhaust pipe is inserted into the bottom of the transition duct. - Page 10 INSTALLATION (continued) Disconnect the wire connector between the push switch assembly and wire box, then detach the front cover by disengaging its hinge part. NOTE Be careful not to damage the hinge part. Align 4 screw holes of the liner and range hood unit, then fix securely using the supplied screws (M5×30) NOTE...
-
Page 11: Connecting Power Supply Wires
INSTALLATION (continued) 3. CONNECTING POWER SUPPLY WIRES WARNING • Electrical wiring should be done by a qualified person(s) in accordance with all- applicable codes and standards, including fire-rated construction. An unqualified person doing the work could result in fire, electric shock or injury. •... - Page 12 INSTALLATION (continued) Connect the electrical wires as follows: Connect wires tightly and securely using wire connectors (not supplied). • Black to Black Replace the wire cover with the screw removed previously. Make sure that all wires are connected properly and enclosed inside of the wiring compartment. •...
-
Page 13: Final Assembly And Check
INSTALLATION (continued) 4. FINAL ASSEMBLY AND CHECK One 40 W light bulb (not supplied) can be mounted to this range hood. Prior to final assembly, install a light bulb (ordinary type, in the base diameter 17 mm), rated 120 V-40 W or below. Assembly (1) Hang the front cover on the hinge part. -
Page 14: Explanation To The End User
INSTALLATION (continued) 5. EXPLANATION TO THE END USER (1) Refer to the Operation Manual, explain the operation of this range hood to end users. (2) The Installation Manual and Operation Manual should be given to the end user. Motor Control Switch CIRCUIT DIAGRAM Connector White... - Page 15 Fuji Industrial USA, Inc. 16300 Christensen Rd., Ste-212 Seattle, WA 98188-3403 Telephone: 1-888-547-9880...
Need help?
Do you have a question about the BUF-03R and is the answer not in the manual?
Questions and answers