Samsung SL-M3820DW/XAA User Manual page 242

Printing quality problems
Condition
Toner specks
A a B b C c
A a B b C c
A a B b C c
A a B b C c
A a B b C c
Dropouts
A a B b C
A a B b C
A a B b C
A a B b C
A a B b C
White Spots
• The paper may not meet specifications; for example, the paper may be too moist or rough.
• The transfer roller may be dirty. Clean the inside of your machine (see "Cleaning the machine" on page 73).
• The paper path may need cleaning. Contact a service representative (see "Cleaning the machine" on page 73).
If faded areas, generally rounded, occur randomly on the page:
• A single sheet of paper may be defective. Try reprinting the job.
• The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper.
• The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper.
• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set type to Thick (see "Opening
printing preferences" on page 47).
If these steps do not correct the problem, contact a service representative.
If white spots appear on the page:
• The paper is too rough and a lot of dirt from paper falls to the inner components within the machine, so the transfer roller may be
dirty. Clean the inside of your machine (see "Cleaning the machine" on page 73).
• The paper path may need cleaning. Clean the inside of your machine (see "Cleaning the machine" on page 73).
If these steps do not correct the problem, contact a service representative.
Suggested solutions
242
6. Troubleshooting