Command syntax:
Example:
9.0
D
T
YNAMIC
HROTTLING
Dynamic throttling prevents unplanned or abrupt device shutdowns by lowering the IO performance of devices if power
consumption and/ or temperature of increases. Dynamic throttling is split into parts: thermal and power throttling.
9.1
T
T
HERMAL
HROTTLING
Thermal throttling reduces IO performance of X8 Accelerator devices if temperature goes above the default threshold
(T[throttle], default: 78°C). If temperature continues to increase and reaches 83°C the device is brought down to the lowest
IO performance. If temperature reaches 85°C (T[offline]), the device completely shuts down. However, if device cools down
and stays below T[throttle], the IO performance increases and brought back to maximum level.
9.2
P
T
OWER
HROTTLING
Power throttling reduces IO performance of X8 Accelerator devices if power consumption goes above the default threshold
of 24W. It comes in 2 modes: turbo and compliant mode. In turbo mode throttling is disabled while in compliant mode the
device is brought down to lower IO if power consumption exceeds threshold of 24W and stays above the threshold. When
power consumption stays below the threshold value, IO performance increases and brought back – if possible, up to the
maximum level.
The throttling default settings: T[throttle], T[warning], T[offline], Turbo/
N
OTE
Compliant, Power Threshold, and IO Performance levels are done at factory.
S
X8 A
EAGATE
CCELERATOR FOR
W
U
G
, R
INDOWS
SER
UIDE
EV
. A
28