Seagate 1200 SSD Product Manual page 62

Table 15 Supported commands
C
OMMAND NAME
START UNIT/STOP UNIT
SYNCHRONIZE CACHE
SYNCHRONIZE CACHE (16)
TEST UNIT READY
UNMAP
VERIFY (10)
BYTCHK bit
VERIFY (12)
VERIFY (16)
VERIFY (32)
WRITE (6)
WRITE (10)
DPO bit
FUA bit
WRITE (12)
WRITE (16)
WRITE (32)
WRITE AND VERIFY (10)
DPO bit
WRITE AND VERIFY (12)
WRITE AND VERIFY (16)
WRITE AND VERIFY (32)
WRITE BUFFER (modes 0, 2, supported)
WRITE BUFFER
Firmware Download option (modes 5, 7, Ah and Bh) [2]
Firmware Download option (modes 4, 5, 7)
WRITE LONG (10)
WRITE LONG (16)
WRITE SAME (10)
PBdata
LBdata
WRITE SAME (16)
WRITE SAME (32)
XDREAD
XDWRITE
XPWRITE
[1] Seagate 1200 SSD drives can format to 512, 520, 524, 528, 4096, 4160, 4192 and 4224 bytes per logical block.
[2] Warning. Power loss during a firmware upgrade can result in firmware corruption. This usually makes the drive inoper-
able.
[3] Reference MODE SENSE command 1Ah for mode pages supported.
[4] Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
S 1200 SSD P
EAGATE RODUCT
M , R . A
ANUAL EV
C S
OMMAND CODE UPPORTED
1Bh Y
35h Y
91h Y
00h Y
42H Y
2Fh Y
Y
AFh N
AFh Y
7Fh/000Ah Y
0Ah Y
2Ah Y
Y
Y
AAh N
8Ah Y
7Fh/000Bh Y
2Eh Y
Y
AEh N
8Eh Y
7Fh/000Ch Y
3Bh Y (non-SED drives only)
3Bh
Y (non-SED drives only)
Y (SED drives only)
3Fh Y
9Fh/11h Y
41h Y
N
N
93h Y
7Fh/000Dh Y
52h N
50h N
51h N
56