Air Cleanliness; Corrosive Environment; Electromagnetic Susceptibility - Seagate 1200 SSD Product Manual

c. Non-operating
The limits of non-operating vibration shall apply to all conditions of handling and transportation. This includes both iso-
lated drives and integrated drives.
The drive shall not incur physical damage or degraded performance as a result of vibration.
Vibration may be applied in the X, Y, or Z axis.
Non-operating translational random shaped profile
20 - 2000 Hz
6.5.5

Air cleanliness

The drive is designed to operate in a typical office environment with minimal environmental control.
6.5.6

Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial
environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this
accelerated testing cannot duplicate every potential application environment.
Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals
as electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel and gold
films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur
is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the
surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials
used in cabinet fabrication, such as vulcanized rubber, that can outgas corrosive compounds should be minimized or
eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free
alternatives.
6.5.7

Electromagnetic susceptibility

See Section 2.1.1.1.
S 1200 SSD P
EAGATE RODUCT
M , R . A
ANUAL EV
11.08 GRMS
41