Auto Power Off; Îlcd Power Save; Format; Time Difference - FujiFilm FinePix V10 Owner's Manual

SET-UP
î AUTO POWER OFF

AUTO POWER OFF

AUTO POWER OFF
:
OFF OFF
1
: 2 MIN MIN 5 MIN MIN
2 :
ON ON 2 MIN MIN
:
OK OFF OFF
3
: SET SET
:
SET SET
◆
To restore power to the camera
Î LCD POWER SAVE
LCD POWER SAVE LCD POWER SAVE
: OFF OFF
1
: 2 MIN MIN
2 :
ON ON ON ON
: OK OK OFF OFF
3
:
SET SET
: SET SET
82
✽ How to use the SET-UP menu (➡P.76)
When this function is active and the camera is left
unused for 2 or 5 minutes, it turns camera off. Auto
power off function prevents leaving the power on.
●
!
The Auto power off function is disabled during automatic
playing back and when a USB connection is being used.
◆
Press the "POWER" button to turn the camera back
on for shooting.
w
Hold down the " " button for about 1 second to play
back images.
When this function is active, you can save power
and get the maximum possible running time from
your battery.
The LCD monitor darkens when camera is not used
for 10 seconds.
●
!
The LCD power save function is disabled in High-speed
shooting mode, Playback mode and Movie mode.
When the LCD monitor is dark, pressing the shutter
button down halfway recovers the LCD monitor
brightness.
●
!
Pressing any other button as well as the shutter button wakes
the camera up.
ï FORMAT

FORMAT

FORMAT
FORMAT OK? FORMAT OK?
ERASE ALL DATA ERASE ALL DATA
OK OK CANCEL CANCEL
SET SET
1 0 2 0
ó TIME DIFFERENCE
This function sets a time difference relative to the date and time currently set. When this setting is
enabled, the specified time difference is applied when pictures are taken.
Use this function when traveling to destinations in different time zones.
1
0 1 0 2

TIME DIFFERENCE

TIME DIFFERENCE
HOME HOME
LOCATION LOCATION :
TIME DIFFERENCE TIME DIFFERENCE
SET SET CANCEL CANCEL
2
TIME DIFFERENCE TIME DIFFERENCE
TIME DIFFERENCE TIME DIFFERENCE
LOCATION LOCATION :
TIME DIFFERENCE TIME DIFFERENCE SET SET
SET SET CANCEL CANCEL
1 0 2 0
✽ How to use the SET-UP menu (➡P.76)
Initialize (format) the xD-Picture Card for use with
the camera.
Because initializing the xD-Picture Card erases all
the frames (files), including protected frames (files).
Back up important frames (files) onto your PC or
another media.
1 Press "d" or "c" to select "OK".
2 Pressing the "MENU/OK" button erases all the
frames (files) and initializes the xD-Picture
Card.
●
!
When [CARD ERROR], [WRITE ERROR], [READ ERROR]
or [CARD NOT INITIALIZED] appears, see P.103 for
information before formatting the xD-Picture Card.
1 Press "c".
2 Press "a" or "b" to change between " å " HOME
ß
and " " LOCAL.
ß
To set the time difference, select " " LOCAL.
å HOME: Your home time zone
ß
LOCAL: Your destination time zone
1 Press "d".
2 Press "a" or "b" to select "TIME DIFFERENCE".
Continued
4
83