Getting Ready; Loading The Battery And The Media; Compatible Battery - FujiFilm FinePix V10 Owner's Manual

1

LOADING THE BATTERY AND THE MEDIA

Getting Ready

Compatible battery

Terminals
Indicator
1
2
Battery release catch
Hold the battery so that the indicators are aligned. Push the battery release catch aside while
loading the battery. Check that the battery is firmly held in place.
10
Always use the Rechargeable Battery NP-40
(included).
The use of other brands of rechargeable battery
could cause faults or damage to the camera.
h Rechargeable Battery NP-40 750 mAh (1)
●
!
The battery is not fully charged at shipment and must be
fully charged before being used.
●
!
Do not stick labels onto the battery as this could cause the
battery to become jammed inside the camera.
●
!
When removed from the camera, the battery should be stored
and transported in the case provided. Any contact between the
battery terminals could cause the battery to short-circuit and
overheat.
●
!
See P.100-101 for information on the battery.
Check that the camera is turned off before opening
the battery cover.
●
!
If opening the battery cover while the camera is still on, the
camera will turn off.
●
!
Do not apply force to the battery cover.
Do not open the battery cover while the camera is
on. This could damage the xD-Picture Card or ruin
the image files on the xD-Picture Card.
Indicators Indicators
3
Gold marking Gold marking
Gold contact area Gold contact area
4
◆
How to replace the xD-Picture Card
Align the gold marking on the xD-Picture Card slot
with the gold contact area on the xD-Picture Card.
Push the card firmly all the way into the slot.
●
!
If the xD-Picture Card is oriented incorrectly, it will not go all
the way into the slot. Do not apply force when inserting an
xD-Picture Card.
Close the battery cover.
◆
Push the xD-Picture Card into the slot and then
slowly remove your finger. The lock is released and
the xD-Picture Card is pushed out.
1
11