FujiFilm FinePix S8100fd Owner's Manual page 93

MEMO
• When DPOF settings were specified on another
camera.
RESET DPOF OK? RESET DPOF OK?
YES YES NO NO
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
[RESET DPOF OK?] appears.
Pressing MENU/OK erases all of the DPOF settings
already specified for each frame (file). Specify the
DPOF setting for each frame (file) again.
• Prints of up to 999 frames (files) can be ordered on the
same Memory Card.
• DPOF settings cannot be specified for movies.
CAUTION
• Pressing DISP/BACK while choosing settings will
cancel all current settings. If there were previous DPOF
settings, only the modifications are canceled.
• When selecting the [WITH DATE E] setting, the date
is imprinted on your shots using the Print Service or a
DPOF-compatible printer (depending on the printer
specifications, the date may not be printed in some
cases).
• Images photographed with a camera other than FinePix
S8100fd may not be specified DPOF settings.
Setting the menu (➝p.90)
Intelligent Face Detection
PRINT ORDER ( DPOF DPOF )
PRINT ORDER
DPOF DPOF : 00000 00000
00 00 SHEETS SHEETS
FACE COUNT FACE COUNT
FRAME FRAME SET SET
When DPOF settings are set to the images taking with the
Intelligent Face Detection (➝p.29) (
screen), press (Intelligent Face Detection), the frame
appears around the detected face, and then the number
of the detected faces is set to print number. It is easy to
set the number of prints for each person in the picture.
Press n or o to set the print number. Press
(Intelligent Face Detection) again, the number of the
detected faces is set to the print number. After setting,
press MENU/OK.
appears on the
Continued Q
93