FujiFilm FinePix S8100fd Owner's Manual page 143

Warning Displayed
Prints were specified for 1000 or more frames in the
DPOF frame settings.
[DPOF FILE ERROR]
[CAN NOT SET DPOF] An attempt was made to specify DPOF settings for a
[r CAN NOT SET movie or an image that is not supported by DPOF.
DPOF]
[CAN NOT ROTATE] An attempt was made to rotate a movie or an image
[r CAN NOT ROTATE] shot using a camera other than FinePix S8100fd.
[COMMUNICATION The camera is not connected to a PC or printer.
ERROR]
Displayed for PictBridge.
[PRINTER ERROR]
Displayed for PictBridge.
[PRINTER ERROR
RESUME?]
Displayed for PictBridge.
[CANNOT BE PRINTED]
Explanation Remedy
The maximum number of frames for which prints can
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
• Check that the USB cable is connected correctly.
• Check that your printer is turned on.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.
• Refer to the user manual for the printer being used
and check whether the printer supports the JFIF-
JPEG or Exif-JPEG image format. If not, the printer
cannot print the images.
• Movies cannot be printed.
• Was the image data photographed using FinePix
S8100fd?
You may not be able to print some images
photographed on other cameras.
143