Center; Area - FujiFilm FinePix S20 Pro Owner's Manual

STILL PHOTOGRAPHY MENU
STILL PHOTOGRAPHY MENU
3
Ｃ ＯＭ ＯＭＰ Ｌ Ｅ Ｔ Ｅ Ｄ ！ Ｐ Ｌ Ｅ Ｔ Ｅ Ｄ ！
ＯＫ ＯＫ Ｓ Ｅ Ｔ Ｓ Ｅ Ｔ BACK BACK Ｃ Ａ Ｎ Ｃ Ｅ Ｌ Ｃ Ａ Ｎ Ｃ Ｅ Ｌ
３ ３ ３ ３
Ｉ Ｓ Ｏ ２ ０ ０ Ｉ Ｓ Ｏ ２ ０ ０
ＯＶＥＲ ＯＶＥＲ ＵＮＤＥＲ ＵＮＤＥＲ
or
Ｏ Ｖ Ｅ Ｒ Ｏ Ｖ Ｅ Ｒ
Ｐ ーーーー ーーーー Ｆ ーーー ーーー
AF MODE
Ａ Ｆ Ａ Ｆ ＭＯ Ｄ Ｅ Ｏ Ｄ Ｅ
Ａ Ｒ Ｅ Ａ Ａ Ｒ Ｅ Ａ
Ｃ Ｅ Ｎ Ｔ Ｅ Ｒ Ｃ Ｅ Ｎ Ｔ Ｅ Ｒ
ＭＵ Ｌ Ｔ Ｉ Ｕ Ｌ Ｔ Ｉ
Ｏ Ｆ Ｆ Ｏ Ｆ Ｆ Ａ Ｕ Ｔ Ｏ Ａ Ｕ Ｔ Ｏ
±１／３ １／３
３ ３ ３ ３
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ ２ ０ ０ ２ ０ ０
Ｐ Ｐ ２ ５ ０ ２ ５ ０ Ｆ ５． ６
２ ５ ０ ２ ５ ０ Ｆ ５． ６
60
When the correct exposure is measured,
" " appears.
Press the "MENU/OK" button to confirm the setting.
G
!
The specified custom white balance is retained until it is
reset. This setting is retained even if the batteries are
removed.
G
!
After taking the picture, check the "Color (White Balance)"
setting for the image.
i Set "IMAGE DISP." to "PREVIEW" in the SET-UP screen
(➡P.83).
i Set the Power switch to " " (➡P.19).
When " " or " " appears, the white
balance was not measured at the correct exposure.
Set the exposure compensation again, using a
negative value (–) when " " appears and a
positive value (+) when " " appears.

AREA

CENTER

MULTI
MULTI
Pressing the Shutter button down halfway, the
camera recognizes any strongly contrasting subject
near the center of the screen and displays the AF
frame over subject in focus.
G
!
If the camera has difficulty in focusing on the main subject,
select the " " CENTER focusing mode and use AF/AE lock
(➡P.27).
３ ３ ３ ３
Ｉ Ｓ Ｏ Ｉ Ｓ Ｏ ２ ０ ０ ２ ０ ０
Ｐ ２ ５ ０ ２ ５ ０ Ｆ ５． ６
1
1 0 0 3 2 0
Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ Ａ Ｆ Ａ Ｒ Ｅ Ａ Ｓ Ｅ Ｌ Ｅ Ｃ Ｔ Ａ Ｆ Ａ Ｒ Ｅ Ａ
Before moving
After moving
2
３ ３ ３ ３
Ｉ Ｓ Ｏ ２ ０ ０ Ｉ Ｓ Ｏ ２ ０ ０
Ｐ ２ ５ ０ ２ ５ ０ Ｆ ５． ６
Regardless of the AF frame location, the exposure is always set using the area in the center of the
screen. To expose the shot for your main subject, use AE lock.
CENTER
The camera focuses on the center of the screen.
Use this setting when taking pictures using AF/AE
lock (➡P.27).
AREA
The camera changes the focusing position on the
screen. Use this setting when composing the shot
using a tripod and changing the focusing position.
1 Hold down the " " button.
2 Press "a", "b", "d" or "c" to move the "
(target point) to the focusing position.
3 Release the " " button.
The AF frame appears in the location to which the
target point was moved.
Take the picture in the normal way.
To reposition the AF frame, repeat step 1 .
"
61