Table of Contents
Advertisement
Configuring a static IP network connection
To configure a static IP network connection:
1.
Repeat steps 1 to 4 of the previous section
Configuring a dynamic IP/PPPoE network
connection.
Click Use the following IP address.
2
3.
Enter the IP address, Subnet mask and Gateway from
your service provider.
4.
If needed, enter the preferred DNS Server address and
alternative address.
When done, click OK.
5.
Setting up a Bluetooth Wireless Connection
(Selected models only)
All-in-One PCs with Bluetooth technology eliminates the need for cables for connecting to
Bluetooth-enabled devices. Examples of Bluetooth-enabled devices include Notebook PCs,
Desktop PCs, and mobile phones.
NOTE: If your All-in-One PC did not come with built-in Bluetooth, you need to connect a USB
Bluetooth module in order to use Bluetooth.
To add a Bluetooth device in Windows® 7:
1.
Switch ON the Wireless function if necessary.
Press FN+F2 until the wireless LAN
2.
and Bluetooth icons are displayed and
enabled.
You can also double-click the
Wireless Console icon in the Windows
notification area and select the
Bluetooth icon.
All-in-One PC ET2311 Series
5
Advertisement
Table of Contents
