[N Program Ae] - FujiFilm FinePix S1000fd Owner's Manual

Setting the Shooting Mode

[N PROGRAM AE]

This is an automatic mode to specify the settings except
for the shutter speed and aperture setting.
This is a simple way to take pictures the same as the <
Aperture-priority Auto and M Shutter-priority Auto modes
(Program shift).
Shooting functions:
• [ PHOTOMETRY] (➝p.80)
• [T WHITE BALANCE] (➝p.81)
• [H FOCUSING] (➝p.83)
• [ AF MODE] (➝p.84)
• [G SHARPNESS] (➝p.86)
• [ FLASH] (➝p.87)
• [ BRACKETING] (➝p.87)
CHECK
See p.65 for information on the available flash modes.
Z Program shift
54
Set the Mode dial to N.
ISO 100 ISO 100
PROGRAM SHIFT PROGRAM SHIFT
60 60 F3 F3. 5
A Press D to open the setting screen.
B Select different shutter speed and aperture
setting combinations without changing the
exposure setting.
C Press the shutter button to take pictures.
MEMO
• Program shift can be used when Suppressed flash
(➝p.65) is set in flash mode.
• The shutter speed and aperture setting appear in yellow
when the camera is in Program shift mode.
• Any of following cancels Program shift:
- Changing the Mode dial setting
- Setting the camera to Playback mode
- Turning the camera off
- Popping the flash up
CAUTION
When the brightness of the
subject is outside the camera's
ISO 100 ISO 100
brightness metering range, [---]
appears as the shutter speed and
aperture setting on the screen.
SET SET