FujiFilm FinePix S1000fd Owner's Manual page 142

Warning Displays
Warning Displayed
[CAN NOT TRIM]
[DPOF FILE ERROR]
[CAN NOT SET DPOF]
[r CAN NOT SET
DPOF]
[CAN NOT ROTATE]
[r CAN NOT ROTATE]
[CANNOT DETECT]
[ CANNOT DETECT]
[r CANNOT DETECT]
[ CANNOT DETECT]
[COMMUNICATION
ERROR]
[PRINTER ERROR]
[PRINTER ERROR
RESUME?]
142
Explanation
• An attempt was made to trim an image shot using
a camera other than FinePix S1000fd.
• The image is damaged.
Prints were specified for 1000 or more frames in the
DPOF frame settings.
An attempt was made to specify DPOF settings for a
movie or an image that is not supported by DPOF.
An attempt was made to rotate a movie or an image
shot using a camera other than FinePix S1000fd.
An attempt was made to correct the red-eye effect in
images taken with [FACE DETECTION] set to [OFF],
movies, images taken by another camera, or images
not allowing red-eye removal.
The camera is not connected to a PC or printer.
Displayed for PictBridge.
Displayed for PictBridge.
Remedy
The image cannot be trimmed.
The maximum number of frames for which prints can
be specified on the same Memory Card is 999.
Copy the images for which you want to order prints
onto another Memory Card and then specify the
DPOF settings.
DPOF printing cannot be used with this image
format.
These images cannot be rotated by image formats.
Red-eye removal cannot be used with these image
formats.
• Check that the USB cable is connected correctly.
• Check that your printer is turned on.
• Check that the printer is not out of paper or out of
ink.
• Turn the printer off briefly and then turn it back on.
• Refer to the user manual supplied with your
printer.
Check that the printer is not out of paper or out of ink.
Printing automatically restarts when the error is
cleared. If the message still appears after checking,
press MENU/OK to restart printing.