Lcd Brightness; Lcd Mode; Auto Power Off - FujiFilm FinePix JV100 Series Owner's Manual

g LCD BRIGHTNESS
Press the selector up or down
to choose display brightness
and press MENU/OK to select.
a LCD MODE
If ON is selected, the monitor will dim to save
power if no operations are performed for
several seconds. Full brightness can be restored
by pressing the shutter button halfway. The
monitor does not dim in movie mode or during
playback.
o AUTO POWER OFF
Choose the length of time before the camera

LCD BRIGHTNESS

turns off automatically when no operations
0
are performed. Shorter times increase battery
life; if OFF is selected, the camera must be
SET CANCEL
turned off manually. Note that regardless of the
option selected, the camera will not turn off
automatically when connected to a printer (pg.
47) or computer (pg. 52) or when a slide show is
in progress (pg. 64).
B Tip: Reactivating the Camera
To reactivate the camera after it has turned off
automatically, use the n button or press the D
button for about a second (pg. 11).
A Note
Although OFF is selected for o AUTO POWER OFF,
the camera will turn off automatically if no operations
are performed for five minutes in the following case:
• STANDBY is displayed in A.
• B is displayed in the shooting mode.
The Setup Menu
77