Huawei HG232f User Manual page 49

5 Configuring Frequently Used Functions
Set the subnet mask of the LAN interface to 255.255.255.0.

Disable the DHCP server function.

Enable the DHCP relay function.

Select SSID1 for SSID (default value).

Set the name of SSID1 to my SSID that is the same as the setting on router A.

Set the WLAN channel to 1 that is the same as the setting on router A.

The WLAN encryption settings are as follows (the same as the settings on router A):

Set the security mode to WPA-PSK/WPA2-PSK.
−
Set the encryption mode to AES.
−
Set the password used for accessing the WLAN to MyPassword@2012.
−
Enable the WDS function and set the WDS mode to Repeater.

Add the wireless MAC address of router A to the WDS MAC list.

The configuration procedure is as follows:
The following procedure describes how to change the parameter settings as required. You can
retain the default settings of the parameters that do not need to be changed.
Step 1
Find and record the wireless MAC addresses of router A and router B.
The value of Wireless MAC is a character string that is similar to
00-11-09-11-04-DD, and can be obtained by using the wireless card client to scan the
corresponding SSID. Suppose the wireless MAC address of router A is
AA:AA:AA:AA:AA:AA and that of router B is BB:BB:BB:BB:BB:BB.
Step 2
Set the WLAN parameters of router A.
1. Log in to the Web-based configuration utility of router A.
2. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
3. Set the following parameters.
Channel: 1
−
SSID Index: SSID1
−
SSID: MyNewSSID
−
Security: WPA-PSK/WPA2-PSK
−
WPA Pre-Shared Key: MyPassword@2012
−
WPA Encryption: AES
−
4. Click Submit.
5-22
HG232f 300Mbps Wireless Router
User Guide