Huawei HG232f User Manual page 26

HG232f 300Mbps Wireless Router
User Guide
The WPS indicator light of the router starts blinking. If the WPS indicator light does not
start blinking, the WPS function cannot be enabled. For solutions to other WPS issues,
see chapter 8 "FAQs."
Step 3 Enable the WPS negotiation function of the wireless network adapter on your computer
within 2 minutes, and then wait for a short while (typically 10 seconds, at most 120
seconds).
For details, see the user guide provided by the vendor of your wireless adapter.
The router WPS indicator light stops blinking and remains lit, indicating that the router is
connected to your computer over the WLAN. This state lasts 300 seconds. The WPS
indicator light then turns off.
----End
You need to set up a wireless connection only once. You can access the wireless network
anytime you want as long as the wireless network name and password are not changed.
When the router is working properly, your computer connects to the router automatically
after the computer's wireless function is enabled.
4 Configuration of WLAN Parameters
4-5