Fi Increasing Monitor Brightness - FujiFilm FinePix F470 Owner's Manual

PHOTOGRAPHY FUNCTIONS
fi INCREASING MONITOR BRIGHTNESS
This is useful when checking the shot composition for dimly lit scenes (Slow synchro shots, etc.).
1
2
10 10
N N
UP UP
40
Available Photography modes:
B and ?
Set the Mode switch to Photography mode.
Press the " fi (a)" button.
" " appears on the LCD monitor and the subject is
displayed brightly.
To cancel increased brightness:
fi
Press the " (a)" button again.
This function is automatically canceled after each
shot.
●
!
When this function is active, it will increase the amount of
speckling in images on the LCD monitor. This is normal and
does not affect the photographed image.
●
!
This function is purely for checking the composition of your
shot. It does not increase the brightness of the image.
●
!
Even if you increase the brightness in low-light conditions,
you cannot check the subject.
●
!
The color tones may vary depending on the subjects.
p PHOTO MODE PHOTOGRAPHY
˘ QUALITY MODE ( NUMBER OF RECORDED PIXELS )
1
1 0 0 2
2
1 0 0 2
QUALITY QUALITY
: N F
: AUTO AUTO N
: STD STD
3
1 0 0 2
2816x2112: 10
FRAMES FRAMES
: N F
: AUTO AUTO N
:
STD STD
1 Set the Mode switch to Photography mode.
2 Press the " p
" button to display the menu on the
LCD monitor.
The quality setting is retained even when the
camera is off or the mode setting is changed.
˘
1 Press "a" or "b" to select " " QUALITY.
2 Press "c".
1 Press "a" or "b" to change the setting.
2 Press the "MENU/OK" button to confirm the
setting.
●
!
The numbers to the right of setting show the number of
available frames.
●
!
When changing the quality setting, the number of available
frames also changes (➡P.23).
Continued
3
41