Set-Up Menu Options; F Using The Set-Up Screen - FujiFilm FinePix F440 Owner's Manual

SET-UP

F USING THE SET-UP SCREEN

1
1 0 0 3 2 0
ＯＰＴＩＯＮ ＯＰＴＩＯＮ
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
ＬＣＤ ＬＣＤ
2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
2
1 3 4
ＢＥＥＰ ： ＢＥＥＰ ：
ＳＨＵＴＴＥＲ ： ＳＨＵＴＴＥＲ ：
ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ：ＳＥＴ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ：ＳＥＴ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
3
1 0 2 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
2
1 3 4
ＢＥＥＰ ＢＥＥＰ ：
ＳＨＵＴＴＥＲ ： ＳＨＵＴＴＥＲ ：
ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ
ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ：ＳＥＴ ＴＩＭＥ ＤＩＦＦＥＲＥＮＣＥ ：ＳＥＴ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ
4
60
1 Press the "MENU/OK" button to display the
menu on the LCD monitor.
2 Press "d" or "c" to select " F
" OPTION and
then press "a" or "b" to select "SET-UP".
3 Press the "MENU/OK" button to display the
SET-UP screen.
●
!
Always turn the camera off when replacing the battery.
Opening the battery cover or disconnecting the AC power
adapter without turning the camera off may cause the camera
settings to revert to the factory default values set at shipment.
Press "d" or "c" to move to options 1 to 4.
1 Press "a" or "b" to select a menu option.
2 Press "d" or "c" to change the setting.
Press "c" for "FORMAT", "DATE/TIME", "TIME
q
DIFFERENCE" or " RESET".
After you have changed the settings, press the
"MENU/OK" button to confirm the changes.

■ SET-UP menu options

Settings Display Factory default
IMAGE DISP. ON/OFF ON
POWER SAVE 2 MIN/5 MIN/OFF 2 MIN
1
FORMAT OK –
q LCD
ON/OFF ON
§ BEEP OFF/1/2/3 2
§ SHUTTER
OFF/1/2/3 2
2
DATE/TIME SET –
TIME
SET –
DIFFERENCE
FRAME NO. CONT./RENEW CONT.
USB MODE ¶/q WEB/® ¶
3
START-IMAGE ON/OFF OFF
ENGLISH
VIDEO SYSTEM NTSC/PAL –
4
q RESET
OK –
Explanation
Specifies whether an image checking screen (photography
result) appears after taking a picture.
The image appears for a few moments and then recorded.
Reduces the camera's power consumption and
subsequently turns the camera off when not being used.
Erases all files.
Specifies whether the LCD monitor is ON or OFF when the
camera is turned on in Photography mode.
Sets the volume of the tone emitted when the camera
controls are used.
Sets the volume of the sound emitted when the shutter
operates.
Corrects the date or time.
Specifies the time difference settings.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
¶
: DSC (Mass storage device) mode
This mode provides a simple way to read images from an
xD-Picture Card and store images onto an xD-Picture
Card.
q
WEB: WEB CAM (WEB Camera) mode
This function allows you to conduct videoconferencing
sessions between PCs connected to the Internet.
✽ Windows XP SP1 only
®
: PictBridge
If a printer that supports PictBridge is available, images can
be printed by connecting the camera directly to the
PictBridge-compatible printer without using a computer.
Specifies whether the startup screen appears on the LCD
monitor when the camera is turned on.
Specifies the language used for LCD monitor display.
Specifies whether video output is set to NTSC or PAL.
Resets all the camera settings (other than the DATE/TIME,
TIME DIFFERENCE, LANG. and VIDEO SYSTEM) to the
factory default values set at shipment. A confirmation
message appears when you press "c". To reset the camera
settings, press the "MENU/OK" button again.
page
–
62
62
–
–
–
15
63
64
76
75
82
4
–
17
–
–
61