Acer P5207B Manual page 22

22
• Setting up the Client Mode
1 Connect the Wi-Fi adapter to the USB jack of the projector.
2 Adjust projector source to DLNA.
3 Press / to select Setup and press ENTER. The Network Settings page
displays.
4 Press / to select Client Mode.
5 Select a network you want to join. If you select a secured network, a
dialogue will pop up asking you to enter the username and password.
• Setting up the WiFi Direct Mode
1 Connect the Wi-Fi adapter to the USB jack of the projector.
2 Adjust projector source to DLNA.
3 Press / to select Setup and press ENTER. The Network Settings page
displays.
4 Press / to select WiFi Direct Mode.
5 Enable WiFi Direct and press
to connect to other devices with WiFi Direct function.
/ to select On. Now the projector is ready