Acer P5207B Series User Manual page 34

24
The up/down move of your electronic screen relates to power
Auto Screen
on/off of the projector.
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
VGA OUT
devices.
(Standby)
Press
Reset
parameters on all menus to the factory default settings.
Security
This projector provides a useful security function for the
administrator to manage the projector.
Press
function is enabled, your must enter "Administrator
Password" first before changing the security setting.
•
Security
•
Timeout (Min.)
Once "Security" is set to "On", you can set timeout function.
•
•
•
•
•
Enabling this function slightly increases the standby
power consumption.
after choosing "Yes" to return the display
to change the "Security" setting. If the security
The factory default of "Administrator Password" is
"1234".
Select "On" to enable the security function. You have to
enter password depending on the "Security Mode".
Please refer to "User Password" section for details.
If "Off" is selected, you can switch on the projector
without password.
Press to select timeout duration.
The range is from 10 to 990 minutes.
When time is up, the projector will request you to enter
the password again.
The factory default setting of "Timeout (Min.)" is "Off".
Once the security function is enabled, the projector will
request you to enter password when switching on the
projector. Both "User Password" and "Administrator
Password" can be accepted for this dialogue.