FujiFilm FinePix F20 Owner's Manual page 118

Power Supply and Battery
AC Power Adapter
Always use the AC Power Adapter AC-5VC with the
camera.
The use of an AC power adapter other than AC-5VC can
be damaged to your digital camera.
• Use the AC power adapter for indoor use only.
• Plug the connection cord plug securely into the DC input
terminal of the FUJIFILM Digital camera.
• Turn off the FUJIFILM Digital camera before
disconnecting the cord from the FUJIFILM Digital
camera's DC input terminal. To disconnect, pull out the
plug gently. Do not pull on the cord.
• Do not use the AC power adapter with any device other
than your camera.
• During use, the AC power adapter will become hot to
the touch. This is normal.
• Do not take apart the AC power adapter. Doing so could
be dangerous.
• Do not use the AC power adapter in a hot and humid
place.
• Do not subject the AC power adapter to strong shocks.
• The AC power adapter may emit a humming. This is
normal.
• If used near a radio, the AC power adapter may cause
static. If this happens, move the camera away from the
radio.
Very occasionally, DC output will be prevented by the
*
operation of the internal protection circuit. In this event,
unplug the AC power adapter AC-5VC from the power
socket for a few moments and then plug it in again. This
will restore DC output.
118
Z Specifications (AC-5VC)
Power Supply AC 100V to 240V,50/60Hz
Rated Input 13W (U.S.A. and Canada)
Capacity 0.08A to 0.2A (other countries)
Rated Output DC 5.0V 1.5A
Temperature 0°C to +40°C (+32°F to +104°F)
During Use
Dimensions 40 mm × 21 mm × 79 mm
(MAX.) (1.6 in. × 0.8 in. × 3.1 in.)
(W × H × D)
Mass (Weight) Approx. 110 g (3.9 oz.)
(excluding power cord)