To Connect The Modem - HP OmniBook vt6200 - Notebook PC Manual

CAUTION
CAUTION

To connect the modem

To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line
cord to connect the modem to the telephone wall jack.
1. Check that the telephone line is an analog line, sometimes called a data line. (You
must not use a digital line.)
2. Connect a telephone cord with an RJ-11 plug into a telephone jack. If the plug on the
phone cord doesn't fit the jack, you may need to use an adapter.
3. Plug the other end of the phone cord the built-in modem.
4. Check your modem's country or region settings:
Windows 2000: click Start, Settings, Control Panel, double-click Phone and
Modem Options, then click Edit on the Dialing Rules tab.
Windows XP: click Start, Control Panel, Printers and Other Hardware, Phone and
Modem Options.
Your built-in modem may not work with multiple phone lines or a private branch
exchange (PBX), cannot be connected to a coin-operated telephone, and does not
work with party lines. Some of these connections may result in excess electrical
voltage and could cause a malfunction in the internal modem. Check your
telephone line type prior to connecting your phone line.
Special restrictions in certain countries
Many countries impose a blackout period after a modem repeatedly fails to connect to
a service provider. The number of failed attempts and the period you must wait before
trying again differ from country to country: check with your telephone company.
Modem and Network Connections
Using the Modem
Corporate Evaluator's Guide 59