Installing Retail Windows Nt 4.0; Requirements - HP OmniBook 6100 - Notebook PC Manual

Using Windows NT 4.0

Installing Retail Windows NT 4.0

Installing Retail Windows NT 4.0
The following procedure installs a retail version of Windows NT 4.0 and configures the
appropriate device drivers.
This section describes how to:
• Prepare for software installation
• Install a retail version of Windows NT 4.0
• Install Service Pack 6a
• Create partition for remainder of hard disk space
• Install APM software
• Disable automatic CD-ROM detection
• Install PCMCIA support
• Install audio and modem support
• Install Intel® SpeedStep™ Technology Applet
• Install pointing device support
• Install USR 56K V.90 Mini PCI Modem support
• Install video support
• Install Intel Pro/100 LAN support
• Install Intel wireless networking
• Create Emergency Repair Disk (ERD)
• Install docking support

Requirements

• HP notebook with internal CD-ROM/DVD drive
• Windows NT 4.0 CD
• Windows NT service pack 5 or higher (available from Microsoft)
• HP notebook drivers for Windows NT 4.0
Location: On the Product Recovery CD in \HP\DRIVERS or on the web at
http://www.hp.com/go/support.
136 Corporate Evaluator's Guide