Insignia NS-42E760A12 User Manual page 17

Insignia 42" LED-LCD HDTV, 1080p
Using DVI (same as HDMI but requires a sound
connection)
Note
A DVI device must be connected to the HDMI 1 jack.
If you connect a DVI device to another HDMI jack,
you will not hear audio.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3 Connect an HDMI-DVI adapter (not included) to
one end of an HDMI cable (not included).
4 Connect the HDMI-DVI adapter to the DVI OUT
jack on the cable or satellite box, then connect
the other end of the cable to the HDMI 1 jack on
the back of your TV.
.
Back of TV
DIGITAL DIGITAL
AUDIO OUT AUDIO OUT ANT /CABLE ANT /CABLE
OUTPUT OUTPUT
5 Connect a 3.5 mm audio cable (not included) to
the PC/DVI AUDIO IN jack on the back of your
TV and to the AUDIO OUT jack on the cable or
satellite box.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
7 Go through the setup wizard on page 22.
Cable or satellite box
HDMI 2 HDMI 2
PC / DVI
VGA VGA HDMI 1 / DVI
(ARC) (ARC)
AUDIO IN
www.insigniaproducts.com
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable box.
3 Connect a component video cable (included) to
the Y-VIDEO, P
B
your TV and the component video out jacks on
the cable or satellite box.
4 Connect an audio cable (included) to the L and
R audio jacks on the side of your TV and to the
audio out jack on the cable or satellite TV box.
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
You can connect the video to the component video
jacks and connect the audio to the digital audio jack
to get digital audio output.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite box.
6 Go through the setup wizard on page 22.
, and P jacks on the side of
R
Cable or satellite box
Side of TV
13