Insignia NS-46L550A11 Quick Setup Manual

32"/37"/42"/46" LCD TV

QUICK SETUP

GUIDE
NS-32L550A11 / NS-37L550A11 /
NS-42L550A11 / NS-46L550A11
Thank You
for purchasing this fine Insignia television.
We hope you enjoy the quality and reliability
of this product for years to come.
_______________________________
Remote control
and 2 AA batteries
Cleaning
cloth
Remote
control holder
AC Audio Component
cable
power cable
cord
TV stand and screws
Quick Setup Guide Q i k S G id
Front features
Power Remote control
indicator sensor
Installing the stand
1 Carefully place your TV screen face-down on
a cushioned, clean surface to protect
the screen from damages and
scratches.
2 Secure the base to the stand with
the four screws provided.
Installing a wall-mount bracket
1 Carefully place your TV screen face-down on a
cushioned, clean surface to protect
the screen from damages and
scratches.
2 Remove the four screws holding
the base to the stand.
3 Remove the four screws securing the
stand.
4 Attach the wall-mount bracket to the back of your TV using
screws provided with the wall mount.
Setting up your remote control
1 Remove the battery cover.
2 Insert two AA batteries into the battery compartment. Make sure that the +
and – symbols on the batteries align with the + and – symbols in the battery
compartment.
3 Replace the cover.
Programming your remote control
To program an existing universal remote control to work with your new Insignia
TV, see the table below for common codes. If you have problems programming
your remote or need a different remote control code, visit
www.insigniaproducts.com for the latest remote control code information.
Universal remote control TV codes
(for all Insignia TVs manufactured after Jan. 1, 2007)
Universal remote control makers and models Set-top box makers and models
Philips
RCA One for All Sony TIVO Comcast Dish Network Motorola
PHDVD5, PH5DSS,
RCU807 URC-6690 RM-VL600 Series 3, HD M1057 VIP508, VIP622 DRC800
PMDVR8, PDVR8
135 0464 8043 0091 0463 720 0463
115
To program your universal Insignia remote control to work with other devices in
the home, see your user guide or visit www.insigniaproducts.com.
Connecting a DVD or Blu-ray DVD player, cable
box, satellite receiver, or game console
Using HDMI (best)
Using component (better)
Using S-Video (good)
DirectTV
RC23
10463
Using composite (fair)
Connecting an antenna
Connect a 75 ohm cable (not included) to the ANT/CABLE IN jack on the back of
your TV and the RF OUT jack on the antenna.