Removing the Top Case Palmrest
1. Remove 19 screws(M2.5*7) , 5 screws(M2*3) and 2 screws(M2*2)on the Bottom case.
Figure 3-37. Screws on Bottom Case
Table 3-9. Screws
Step
Bottom Case Disassembly
2. Turn over the notebook, open the LCD panel. Use a plastic pry slice to insert to the gap
between top case palmrest and bottom case.pry to release all latches,then lift the bottom
edge of top case palmrest.
Screw
M2.5*7 (red cycled)
M2*3 (blue cycled)
M2*2 (yellow cycled)
Quantity
Screw Type
19
5
2
0
3-27