HP ENVY 17-2000 Getting Started Manual page 75

Hp envy17 3d getting started - windows 7
Hide thumbs Also See for ENVY 17-2000:
Table of Contents

Advertisement

b.
7.
Insert a new memory module:
CAUTION:
memory module by the edges only. Do not touch the components on
the memory module, and do not bend the memory module.
a.
b.
64
Chapter 6 Maintenance
Grasp the edge of the memory module (2), and then gently pull
the module out of the memory module slot.
To prevent damage to the memory module, hold the
CAUTION:
memory module by the edges only. Do not touch the
components on the memory module. To protect a memory
module after removal, place it in an electrostatic-safe container.
To prevent damage to the memory module, hold the
Align the notched edge (1) of the memory module with the tab in
the memory module slot.
With the memory module at a 45-degree angle from the surface
of the memory module compartment, press the module (2) into
the memory module slot until it is seated.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Envy 17 3d

Table of Contents