Ati Eyefinity Multi-Display Technology; Example Display Configuration For Single Large Surface (Sls); Switching The Screen Image - HP ENVY 17-2000 Getting Started Manual

ATI Eyefinity Multi-Display technology

Your computer supports the new ATI
the following features:
●
You can now have up to 3 external displays, as long as one of the
displays is connected to the Mini DisplayPort on the computer.
●
Provides a new display configuration by spanning the image across
a group of external displays into a massive single large surface
(SLS).
3D playback is not supported on ATI Eyefinity technology.
NOTE:

Example display configuration for single large surface (SLS)

When you use 3 external displays and span the image across them as
an SLS, the computer display is turned off. The 3 external displays are
connected to the computer using the external monitor port (VGA), the
Mini DisplayPort, and the HDMI port.
Identical resolution is required among all displays to form the
NOTE:
SLS mode. Displays with different native resolutions can still form an
SLS mode by using non-native resolutions.
Windows 7 only supports 2 external displays. To configure 3
NOTE:
external displays in Windows 7, refer to
Center on page

Switching the screen image

Press the
shows the 4 configuration choices, independent of the number of
connected display devices.
7.
switch screen image
Eyefinity technology that provides
TM
Using the ATI Catalyst Control
action key to open a dialog box that
What's new
5