Guest Network; Adding A Guest Network - Dell PowerConnect W-IAP3WN User Manual

Role-based— Select Role-based if you want to specify per-user access rules. See
n
New User Role" on page 145
Unrestricted— Select this to set no restrictions on access based on destination or type of
n
traffic.
Figure 38 - Adding a Voice Network— Access Rules Tab
12. Click Finish. The network is added and listed in the Networks tab.

Guest Network

The Guest wireless network is created for guests, visitors, contractors, and any non-employee users
who use the enterprise Wi-Fi network. The Virtual Controller assigns the IP address for the guest
clients. Captive portal or passphrase based authentication methods can be set for this wireless
network. Typically, a guest network is an un-encrypted network. However, you can specify
encryption settings in the Security tab.

Adding a Guest Network

This section provides the procedure to add a guest network.
60 | Wireless Network
for more information.
Dell PowerConnect W-Series Instant Access Point
"Creating a
6.2.0.0-3.2.0.0 | User Guide