Links - Dell PowerConnect W-IAP3WN User Manual

OS— Operating system that runs on the client.
l
Network— The network to which the client is connected.
l
Access Point— W-IAP to which the client is connected.
l
Channel — The client operating channel.
l
Type— Wi-Fi type of the client: A, G, AN, or GN.
l
Role— Role assigned to the client.
l
Signal— Signal strength of the client, as detected by the AP.
l
Speed (mbps)— Current PHY rate.
l
- Client Tab— Compressed View and Expanded View
Figure 8

Links

The following links allow you to configure the features and settings for the W-Instant network.
Each of these links are explained in the subsequent sections.
"New Version Available" on page 27
l
"Settings" on page 27
l
"RF" on page 29
l
"PEF" on page 30
l
"WIP" on page 30
l
"VPN" on page 31
l
"Wired" on page 31
l
"Maintenance" on page 32
l
"Support" on page 32
l
"Help" on page 32
l
"Logout" on page 33
l
"Monitoring" on page 33
l
"Spectrum" on page 36
l
"Alerts" on page 37
l
"IDS" on page 39
l
"Configuration" on page 39
l
"AirGroup" on page 40
l
"Language" on page 40
l
"Dell PowerConnect W-AirWave Setup" on page 40
l
"Pause/Resume" on page 41
l
26 | Dell W-Instant User Interface Dell PowerConnect W-Series Instant Access Point 6.2.0.0-3.2.0.0 | User Guide