S Dpof Set All /Reset All - FujiFilm FinePix 2300 Owner's Manual

S DPOF FRAME SET
PLAYBACK MENU
3
Use " a " or " b " to specify the number of prints.
G
!
The setting is not saved until you press the "
" c " button to move to another frame or press the
"MENU/OK" button.
G
!
If you do not want a print of the frame, set (reset) the
number of prints to "00 SHEETS".
To specify DPOF settings for another frame,
repeat the procedure from step .
2
52
/ RESET
4
When you have completed the settings, always
press the "MENU/OK" button to confirm the
d " or settings. The total number of prints is displayed on
the LCD monitor and you are returned to the menu.
The " " icon and the number of prints is
displayed for confirmed frames and, if the date
has been set, the " " icon is also displayed.
G
!
If you do not press the "MENU/OK" button, after 10
seconds the menu screen reappears. The settings
for the last selected frame are discarded.
S DPOF SET ALL
PLAYBACK MENU
➀ ➁
1
➀
Use " " or " " to select "SET ALL" or "RESET
a b
ALL".
➁
Press the "MENU/OK" button.
G
!
"SET ALL" specifies 1 print for all the images.
G
!
The settings specified for individual frames are
cancelled.
G
!
Prints can be specified for up to 999 frames on the
same SmartMedia. If you specify more than 1000
8
frames, the " " warning appears.
/ RESET ALL
2
When you press the "MENU/OK" button, a
confirmation screen appears. To proceed with the
set or reset operation, press "MENU/OK". The
total number of prints is displayed on the LCD
monitor and you are returned to the menu.
G
!
To exit the menu, use the " d " or " c " button to select
"[BACK" and then press the "MENU/OK" button.
G
!
If you reset all the frames, the "TOTAL" display
reverts to "00000".
4
53