Symptom
Management Problems
Cannot connect using
the Web browser
Forgot or lost the
password
Troubleshooting Chart
Action
•
Be sure to have configured the Barricade Plus with
a valid IP address, subnet mask and default
gateway.
•
Check that you have a valid network connection
to the Barricade Plus and that the port you are
using has not been disabled.
•
Check the network cabling between the
management station and the Barricade Plus.
•
Press the Reset button on the front panel
(holding it down for at least five seconds) to
restore the factory defaults.
T
ROUBLESHOOTING
A-3