View B─Overview Of Monark User Interface - Native Instruments Monark Manual

(2) FINE: This is used to tune the oscillators +/– 7 semitones.
GLIDE section
(3) Glide type: Selects between an authentic almost linear constant rate (MM) and an alterna-
tive constant time (SILVER) glide with a decelerating curving.
(4) Legato mode: The glide in MONARK can either be active ALWAYS, only when playing
GATO style, by having notes overlap or turned OFF.
(5) TIME: Sets the glide time. The actual glide time depends on the selected mode.
MODULATION section
(6) PB (pitch bend): The pitch bend is used to bend the pitch of a note up or down during a
performance. The range of the pitch bend can be set in View B. See
tion for more details.
(7) Modulation wheel: Controls the amount of filter and oscillator pitch modulation simultane-
ously from OSCILLATOR 3
increasingly applied to the pitch of the sound and filter cutoff frequency if the
are activated in the OSCILLATORS
TORS Section section and
(8) MIX: Allows you to blend between the output signal of
NOISE (pink/red noise) source for modulation purposes.
5.3 View B─Overview of MONARK User Interface
View B offers many options to customize MONARK to your personal taste. You might prefer a
"cleaner" engine and modern performance features. Or you might go for total authenticity.
or NOISE. As the modulation wheel is moved upward modulation is
or FILTER & AMP
↑5.2.3, FILTER & AMP Section
View B─Overview of MONARK User Interface
↑5.3.3, PITCH BEND Sec-
sections. See MOD in ↑5.2.1, OSCILLA-
for more information.
OSC 3 (OSCILLATOR 3)
Overview of MONARK Ensemble
LE-
MOD switches
and the
MONARK - Manual - 38