Loading A Snapshot From The Sidepane; Loading A Snapshot From The Header; Saving A Snapshot - Native Instruments Monark Manual

4.2.1

Loading a Snapshot from the Sidepane

If it is not already visible after startup, you need to open the Sidepane. The Sidepane holds a
full overview of REAKTOR's Snapshot Banks and Snapshots from the currently selected Snap-
shot Bank.
1. Click the Sidepane button (1) in the Header to open the Sidepane.
2. Select a Snapshot Bank (3).
3. Select the name of a Snapshot entry (4).
The name of the selected Snapshot will be highlighted in the Sidepane, and the Snapshot
loaded and ready in MONARK.
4.2.2

Loading a Snapshot from the Header

Loading a Snapshot from the REAKTOR PLAYER drop-down menu in the Header is the sim-
plest way to interact with Snapshots.
1. Click the Snapshot drop-down menu (2). The menu holds all Snapshots and Banks of the
Instrument.
2. Click an entry to select it.
4.3

Saving a Snapshot

Snapshots can only be saved when using the full version of REAKTOR; however, all your set-
tings will be recalled perfectly in a host if you are using REAKTOR PLAYER, so you can tweak
a sound perfectly for your song. All parameter settings made in MONARK will be saved as part
of your DAW project. Please read the REAKTOR documentation for more information on plug-in
mode.
For the latest information on REAKTOR PLAYER please refer to the REAKTOR Getting
Started Guide. This is available from the Help menu within the application itself.
How to Use MONARK
Exploring Factory-set Snapshots
MONARK - Manual - 15