Native Instruments Monark Manual page 26

MIXER Parameters
View A—MIXER section.
(1) VOLUME: Set the volume level of
volume level of each oscillator.
(2) On/Off button: Each sound source
switched on or off. When switched on the output of the sound source can be heard in the mas-
ter output. This does not deactivate the sound source but only mutes it.
Due to the very accurate modeling of this synthesizer an audio signal (filter leakage in this
case) may still be heard even when all sound sources are switched off. To control this
"leakage" please refer to
OSCILLATOR 1,
(OSCILLATOR 1, 2, 3,
↑5.3.5, OSCILLATORS Section.
View A—Overview of MONARK User Interface
2 and 3. This can be used to mix the
FEEDBACK and NOISE) can be
Overview of MONARK Ensemble
MONARK - Manual - 26