How To Use; To Make A Recording - Sharp VC-MH780BM Operation Manual

TINS-4009UMZZEnglish.book Page 11 Monday, November 12, 2001 12:14 PM
BASIC OPERATION

HOW TO USE

• If appears on the VCR display, press
• Check that the clock is displaying the correct time.
SHOWVIEW allows you to program the VCR to record up to eight programmes using the
SHOWVIEW numbers published in TV listings...
1.
SHOWVIEW
Press
2.
Enter the SHOWVIEW number from the TV
listing using the
NOTE:
• An ERROR message will appear if you have entered a number that is not a current
SHOWVIEW number. If this happens press
and enter the correct SHOWVIEW number
3.
Press [ /
4.
If you want to make additional recordings at the same time each day or week, then use
[ / ]to select the WEEKLY, or DAILY option as appropriate.
5.
Press SET to confirm.
NOTE:
• Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR to return to the SHOWVIEW menu, and re-enter the correct SHOWVIEW number
The first time that you use SHOWVIEW to make a
recording on each channel Preset, (PR) may be
highlighted on the menu.
6.
Enter the channel you wish to record using
the NUMBER BUTTONS
you wish to record channel 2 press
VCR will remember this for the future.
NOTES:
You may also access the SHOWVIEW menu by the following procedure:
i.
Press MENU .
ii.
The SHOWVIEW option will be highlighted. Press
Continue from step 2 above.

TO MAKE A RECORDING

TIMER ON/OFF
on the remote control
NUMBER BUTTONS
.
] to select ONCE, WEEKLY, DAILY
, for example if
0 2 . The
GB-11
before starting.
→
S HOWV I EW NO .
ONC E WE E K L Y
CLEAR to delete the numbers as required
DA T E P R S T AR T S T OP
2 1 / 0 6 0 2 1 2 : 0 0
- - / - - - - - : - -
- - / - - - - - : - -
- - / - - - - - : - -
P R : Z D F
: S E L E C T
S E T : E N T E R ME NU : E X I T
SET to confirm.
-
DA I L Y
1 / 2
1 3 : 0 0 S P *
- : - - - - -
- : - - - - -
- : - - - - -
: CHANGE