Lcd Display; Tape Counter And Zero Back - Sharp VC-MH780BM Operation Manual

TINS-4009UMZZEnglish.book Page 20 Monday, November 12, 2001 12:14 PM
ADVANCED OPERATION

LCD DISPLAY

TIME OF DAY
Shows current time of day, if the clock is set.
DISPLAY
Press the button until the time of day
appears. For example, 21:20 appears:
CHANNEL STATUS
Shows the current VCR channel preset. Press the
DISPLAY button until the channel number appears,
for example:

TAPE COUNTER AND ZERO BACK

Tape counter measures the current position of the video tape in real time. ZERO BACK uses the
tape counter to determine a specific point on a tape you may wish to return to.
1.
Press the DISPLAY
appears, for example:
2.
To identify the current position on a video tape
press the CLEAR button and the tape counter
will appear:
When you wish to return to this position on the video tape, press
rewind/advance to this point.
NOTE:
• The tape counter will only operate on recorded sections of tape.
DISPLAY BRIGHTNESS
The LCD display brightness can be changed to suit the ambient lighting in the room. Switch
on the VCR (ensure the menu screen is not on) then press and hold the
approximately 2 seconds. This will reduce the brightness of the VCR display. Repeat the
process to change the display back to the previous setting.
button until tape counter
GB-20
ZERO BACK . The tape will
DISPLAY button for