Starting And Exiting Pc Link; Creating And Saving A New Program - Sharp CE-LK2 Operation Manual

Starting and Exiting PC LINK

1 Starting the PC LINK
Select Start → → → → → Programs → → → → → SHARP PC-LINK for EL-9900 → → → → → SHARP
CE-LK2 to start the PC LINK.
The menu bar and the icons are displayed on the top of the window.
2 Exiting the PC LINK
Select the Exit from the File menu, or double-click on the CLOSE box at the upper-
most-left corner on the screen.
Note: If a communication will not be available, check the settings of the communication
(COM) port and the cable connection. If these procedures will not solve the
problem, set the Power Management and the screen saver to OFF.
(See Readme.txt for details.)

Creating and Saving a New Program

1 Creating a New Program
NOTE: Only programs can be created.
1. Select the New from the File menu.
The Newly-Edited screen is displayed.
2. Enter a program name in Title:
3. Enter a program.
(For details on entering a program, refer to "Using Edit Functions" on page 12.)
2 Saving a Created Program
1. Select the Save As... from the File menu.
The Save As screen is displayed.
2. Specify the drive and folder, and then enter the file name and extension.
The extension is different depending on your calculator.
3. Click on the OK button.
The created program is saved as a new program file with the contents specified in
2.
* Alphanumeric characters can be used for file names. If a program file stored with a file
name that consists of non-alphanumeric characters is sent to the EL-9900, the file
name may change.
8